Shingle Roofing in Texas: What It Costs and Which Type Fits

A shingle roof in Texas runs $5.50 to $9.00 per square foot of roof area installed for architectural and Class 4 shingles, or about $17,600 to $28,800 on a typical 2,000-square-foot home. 3-tab is cheaper and designer shingles cost more. Your roof size, pitch, and shingle grade set the final number.

You're probably weighing a new roof against a real budget, so here's the honest number first.

Here's where the money lands by grade, so you can see the spread:

Pricing updated July 26, 2026, Texas markets. Ranges are per square foot of actual roof area (the surface the crew installs), not your living-space square footage. Roof area runs larger than your home's size, so price off the installed totals, not your house's square footage times the per-foot rate.

Every ARP estimate includes the full tear-off, a deck inspection with photos, synthetic underlayment, new flashing, and the permit, so the number you approve is the number you pay. To size your own roof and price it by grade, try the roof replacement calculator. If you're deciding between shingle and metal, see the metal vs. shingle comparison.

Get a Free Shingle Roof Estimate →

There are four shingle types, and the right one depends on your budget, your hail risk, and how long you're staying.

• 3-tab: the budget pick. Flat, single-layer shingles at the lowest price. Fine for a rental or a short-stay home, but they wear fastest and don't qualify for insurance credits. We rarely recommend them for a primary residence.
• Architectural: the standard. Dimensional shingles that look better, last longer, and handle Texas weather well. This is the default most homes get, and the best balance of cost and life.
• Class 4 impact-resistant: the hail pick. Architectural looks with a UL 2218 Class 4 impact rating. They resist hail better and qualify for a premium discount with most Texas carriers on the hail-and-wind part of your policy.
• Designer: the premium look. Thicker shingles that mimic slate or shake for high curb appeal, at the top of the shingle range.

For most Texas homes in hail country, a Class 4 architectural shingle is the smart call. The insurance credit often offsets the small upcharge within a few years. If you're weighing a longer-lived material, see how shingle compares with tile.

The honest comparison only happens when a contractor installs all four. If the only roof a company knows how to put down is shingle, they're going to tell you shingle. Same for the metal-only guys, same for the tile-only guys. We install architectural shingle, Class 4, standing seam, stone-coated, tile, and synthetic — which means the recommendation you get from us is driven by your roof's pitch, your deck's rating, your ownership horizon, and your HOA. Not by what's on the truck that morning.

Shingles are proven and affordable, so it's fair to know how they fail, because most of it is preventable.

Texas heat and UV are hard on asphalt. Over the years, shingles dry out, curl, and lose the granules that protect them, and hail speeds it up. The other failures are install problems: cheap 3-tab where architectural belonged, missing ice-and-water shield in the valleys, face-nailed flashing, or a felt underlayment that fails in the heat. Most shingle roofs that die early weren't beaten by the weather. They were built with a shortcut the homeowner never saw. A written scope and a Class 4 shingle handle most of it.

A shingle roof is the better value if you're on a budget or moving within a few years, at $5.50 to $9.00 per square foot of roof and 15 to 22 years of life. Metal is the better long-term choice if you're staying, since it lasts 40 to 70 years. The deciding factor is your hold time, not the roof.

Both are good roofs, so the honest answer depends on how long you're staying.

Shingles win the up-front number and match most Texas neighborhoods. Metal wins on lifespan and cost per year over a long hold. If you'll move soon or the budget is tight, a Class 4 shingle roof is the smart spend, and we'll install it just as carefully as a metal one. For the full head-to-head, read metal vs. shingles.

You don't want surprises, so here's the whole thing in three steps, no pressure at any of them.

1. You call or request online. We schedule your free inspection at a time that works for you. No deposit, no obligation.
2. We inspect and send a written estimate. We measure your roof, check your deck and pitch, and put the full scope in writing, shingle grade, underlayment, flashing, and price, usually within 24 to 48 hours.
3. You decide, and we install with a warranty. You're in control the whole way. When you're ready, we install and register your warranty in your name.

What happens on install day

Once you approve the scope, the crew on your roof works under the direct supervision of an ARP project manager who inspects the work at the key stages, not a rotating subcontractor left alone with your house. We tear off the old roof, inspect and photograph the deck, replace any damaged boards (shown to you first), lay synthetic underlayment and ice-and-water shield in the valleys, then install the shingles and flashing. Most shingle roofs go on in one to two days.

The warranty you actually get

Your shingle roof carries two layers: the manufacturer's warranty on the shingles, from GAF or Atlas, and ARP's own Limited Lifetime* workmanship warranty on the install. That second one is the one most contractors are vague about. Ours is registered in your name and backed by the same company that installed the roof.

When you sign a roof contract, you're not hiring a logo on a truck. You're hiring the people accountable for the roof over your family.

• Your inspector and estimator: the person who walks your roof, photographs every finding, and writes the scope you review at your kitchen table. They don't earn more if you upgrade.
• Your project manager: one point of contact from contract through warranty registration, who inspects the crew's work at each stage.
• The vetted crew on your roof: shingle installers supervised start to finish by an ARP project manager, not a crew that disappears after the check clears.
• Randal and Preston Williams: the father-and-son team who own ARP (Randal, COO, and his son Preston, President). Family-owned and operated, they sign the warranties and still answer the phone in year ten.

That accountability is backed by the credentials that matter for a shingle roof: ARP is a GAF Certified Plus Contractor and an Atlas PRO+ Platinum Select Contractor, holds an A+ BBB rating with zero unresolved complaints, and is a member of CTRCA (Central Texas Roofing Contractors Association). Across 5,000+ Texas roofing projects and 300+ five-star reviews, the through-line is documentation.

Which shingle actually makes sense moves with the map. Around San Antonio and Austin, hail frequency is what decides whether a Class 4 impact-resistant shingle pays for itself through the insurance credit. Toward the coast in Victoria, the wind rating and the nailing pattern are what the inspection actually checks. And across the Texas Hill Country, sustained heat ages the mat faster while the HOA often narrows which colors and profiles you are allowed to install. Same product line, four different right answers.

Shingles aren't the right answer for every home, and we'd rather tell you now than sell you something you don't need.

A shingle roof from ARP is a great fit if you:

• Want a proven roof at a fair price, especially a Class 4 shingle in hail country
• Want everything documented in writing before work starts
• Want one supervised crew, not rotating subcontractors
• Want a warranty you can actually use and transfer when you sell

It's probably not the right fit if you:

• Want the longest-life roof made, where metal is the better long-term buy
• Are shopping purely on the lowest bid, since we're not the cheapest and shingles reward install quality
• Only need a small repair, where a targeted fix may be all your roof needs

Whether you choose ARP or someone else, ask every roofer these three. The answers tell you more than any star rating.

1. "Show me the written scope, with shingle grade, underlayment, and flashing, before I sign anything." A real contractor hands you a written scope naming the shingle grade, the underlayment, the ice-and-water shield in the valleys, the flashing detail, permit handling, and warranty terms, before any deposit. If they can't produce one, walk away.

2. "Who's my single point of contact, and will I get photo documentation at each stage?" The company on the invoice should give you one project manager from contract through warranty, plus a photo record at tear-off, mid-install, and final. A contractor who can't name your contact or show how they document the work is telling you how the job will go.

3. "What manufacturer warranty registers in my name, and what does your certification unlock?" Manufacturer warranties from GAF and Atlas require a current certification and registration in your name within a set window. Ask which certification level the contractor holds, what term it unlocks, and when it registers. Vague answers mean the warranty probably isn't real.

Cards that walk the rest of your shingle decision:

You don't have to become a roofing expert to make this call. Book a free inspection and we'll measure your roof, walk your options, and hand you a written scope. No pressure, no obligation.

Get a Free Shingle Roof Estimate →