Metal Roof Cost in Texas: Real Installed Prices for 2026

A metal roof in Texas typically runs $7.60 to $14.50 per square foot of roof area installed. Standing seam sits at $7.60 to $14.50, stone-coated steel at $9 to $12.50. Most whole-home colored standing-seam projects land between $19,800 and $69,600 depending on size and pitch.

Here's how that range breaks down by system, so you can see where your metal roofing in Texas project is likely to land.

Updated July 2026, Texas market pricing (San Antonio and Bexar County table; other markets vary, see below). Prices are per square foot of roof area, which runs larger than your home's living-space square footage.

Every ARP metal install includes full tear-off, deck inspection with photos, synthetic underlayment, ice-and-water shield in the valleys, new flashing at every transition, panel and trim, magnetic nail sweep, permit, and warranty registration. That "what's included" list is where a low bid usually hides its cuts.

Texas isn't one market, so your number shifts a little by region. The table above reflects San Antonio and Bexar County. Austin runs about 6% higher, the Texas Hill Country about 4% higher, and Victoria and South Texas about 3% higher. Your local ARP estimator uses the table for your market, never a stacked adjustment.

A metal roof costs $7.60 to $14.50 per square foot of roof area installed in Texas. Factory-color standing seam runs $8.25 to $14.50, a natural Galvalume mill finish $7.60 to $9.00, and stone-coated steel $9.00 to $12.50. Gauge, profile, and coating decide where you land.

The profile you choose sets where you land in that range. A standing seam panel with a factory Kynar 500 color coat runs $8.25 to $14.50. The same panel in a natural Galvalume mill finish drops to $7.60 to $9.00 because it skips the paint line.

Three things move your per-square-foot number: gauge, profile, and coating.

Gauge is the thickness of the steel. Residential standing seam is typically 24-gauge or 26-gauge, and lower numbers mean thicker steel. If you want the heavier 24-gauge panel for better dent resistance and a flatter look, you sit at the top of the range. A 26-gauge panel costs less and still carries a full manufacturer warranty on most Texas homes.

Profile is how the panels lock together. Standing seam hides its fasteners under the seam, which is why ARP recommends it for your house. Within standing seam, ARP's default is a mechanical double-lock seam, folded twice by a powered seamer for the strongest watertight profile in the industry. Stone-coated steel gives you a shingle or shake look over a steel substrate and costs $9.00 to $12.50 per square foot.

Coating is the finish that protects the steel from Texas sun. Galvalume is an aluminum-zinc coating on the raw panel. A factory Kynar/PVDF color coat sits on top of that and holds its color for decades, which is what adds about $1.50 to $3.00 per square foot over the mill finish.

A 1,000-square-foot colored standing-seam metal roof costs about $8,300 to $14,500 installed in Texas; a value Galvalume finish runs about $7,600 to $9,000. Most homes have more roof area than that. A 1,500-square-foot home carries roughly 2,400 square feet of roof, so a full colored standing-seam replacement there runs about $19,800 to $34,800.

Here's why your whole-home number is bigger than a simple square-foot count. Your roof area is larger than the living space on your tax record, because it includes overhangs, the garage, and the extra surface a pitched roof adds. The table below converts living space to roof area for common home sizes.

Updated July 2026, San Antonio and Bexar County colored standing-seam range, single-story typical pitch. A value Galvalume mill finish runs below these numbers; steeper pitch and complex rooflines push you toward the high end. Your exact number comes from an on-site measurement, not a curbside guess.

If you want your own figure without waiting for a walkthrough, the roof replacement calculator gives you a starting range in about ten seconds.

Five things determine a metal roof's cost: panel gauge, panel profile, coating, roof pitch, and the scope of tear-off and repairs. The panel matters, but the rest of the roof (pitch, penetrations, and decking condition) moves your final number as much as the material does.

You already know the material matters. What surprises most homeowners is how much the rest of the roof, not the panel, moves your final number. Five drivers decide where your metal roof lands in the range.

Panel gauge and profile come first. A 24-gauge double-lock standing seam costs more than a 26-gauge snap-lock, and you're paying for thicker steel and a stronger seam. Coating is second: a factory Kynar color coat adds about $1.50 to $3.00 per square foot over a bare Galvalume finish, and it's worth it on a roof you plan to keep for 40 years.

Roof pitch is third. A steep Texas Hill Country roofline needs more labor, more safety rigging, and more material to cover the same footprint, so a 9:12 pitch can cost noticeably more than a standard 6:12. Tear-off scope is fourth. Pulling one layer of old shingles is routine; if your tear-off uncovers rotted decking, you'll approve replacement boards before a single panel goes down, and you'll see the photos first.

Complexity is fifth. Every valley, dormer, skylight, and chimney is a flashing detail that has to be cut and sealed by hand. A simple gable roof prices low; a cut-up roof with six penetrations prices higher, because the details are where a metal roof leaks or holds.

Honestly? If you're just looking for the cheapest number, we're probably not your contractor. We made peace with that a long time ago.

A metal roof costs more upfront than asphalt shingles but lasts far longer. Architectural shingles run $5.50 to $6.00 per square foot and last 15 to 22 years in Texas. Standing-seam metal runs $7.60 to $14.50 per square foot and lasts 40 to 70 years, so its cost per year is often lower.

A metal roof costs more upfront than asphalt shingles, and it usually costs less per year of service. Architectural asphalt shingles run $5.50 to $6.00 per square foot installed and last 15 to 22 years in Texas heat. Standing-seam metal runs $7.60 to $14.50 per square foot and lasts 40 to 70 years. When you divide the price by the years you get, metal often comes out ahead.

Here's the honest version. If you're planning to sell in the next three to five years, the metal premium rarely comes back in resale value, and architectural shingle is the smarter financial call. If you plan to stay in the home long term, metal is the roof you buy once instead of twice. Your timeline decides this more than the material specs do.

The two biggest problems with metal roofs are upfront cost and improper installation. You pay more on day one than for shingles, and a metal roof only performs if it is seamed and flashed correctly. A bad install shows up as oil-canning or fastener backout. ARP defaults to concealed-fastener standing seam to remove that failure point.

The cost side is straightforward: you pay more on day one than you would for shingles. The install side is where homeowners actually get burned, because a metal roof is only as good as the team that seams and flashes it.

Improper installation shows up two ways. Oil-canning is the visible waviness you see across a flat panel when it wasn't handled, spaced, or fastened correctly. Fastener backout is the slower failure: on exposed-fastener systems, the gasketed screws that hold the panels loosen and back out over years of Texas heat cycling, and each one becomes a potential leak.

That's why ARP defaults to concealed-fastener standing seam on primary homes. When the fasteners are hidden under the seam, there's no gasket sitting in the sun to fail, and the panel is free to expand and contract with the heat. Exposed-fastener R-panel still has a place on your detached shop, barn, or workshop where budget leads, but it isn't what we put on the house itself.

ARP is the right fit if you want a written scope and installed price before you commit, plan to keep the home long term, and want concealed-fastener standing seam from a supervised, certified install team. We are not the right fit if you are selling in three to five years or shopping purely on the lowest bid. Architectural shingle is the smarter call there.

You're probably the right fit if:

• You want a written scope and installed price before you commit a dollar
• You're keeping the home long term and want the roof you buy once
• You want concealed-fastener standing seam installed by a supervised, certified install team
• You want the pricing math (upfront cost against cost per year) laid out honestly
• You want every deck repair photographed and approved before it's charged

You're probably not the right fit if:

• You're selling in the next three to five years, where architectural shingle is the better financial call, and we'll show you the comparison
• You're shopping purely on the lowest bid, since we're not the cheapest metal quote in Texas
• You only need exposed-fastener panels on a barn or shop and want the budget option with no supervision

As a roofing contractor registered with all municipalities across our service areas, ARP installs to manufacturer spec and pulls the permit on every job. That's the baseline, not the upsell.

You have the real ranges now: $7.60 to $14.50 per square foot for standing seam, $9 to $12.50 for stone-coated steel, and a whole-home figure that lands between $19,800 and $69,600 for most Texas houses. What you don't have yet is your number, and that takes an on-site measurement of your pitch, penetrations, and decking.

Wait too long on an aging roof and a small deck repair turns into a full deck replacement, adding thousands to the job. Schedule the walkthrough while the decking is still sound.

Get a Free Metal Roof Estimate →

Compare metal with other roofing materials →