Deliverable 01 · Photo set
Photographs of every defect
Close enough to see the damage, wide enough to show where it sits on your roof.
New Braunfels, Texas
Commercial Metal Roofing in New Braunfels, TX — Roll-Formed On Site
If you manage a metal building in New Braunfels and you're tired of chasing the same seam leak, the fix starts with who forms the panel and who details it.
ARP installs standing seam and R-panel metal roofs on commercial and light-industrial buildings across New Braunfels and Comal County, roll-formed on site to the exact roofline on ARP's own equipment and detailed at the seams and flashings by a dedicated metal foreman. Every metal project starts with a free, photo-documented assessment and a written scope.
Family owned, locally accountable
COO & President — the father and son behind ARP
Why these credentials are on this page
5,000+
Completed projects
4.9★
300+ five-star reviews
GAF GoldElite Commercial
Manufacturer standing
UNIFLEX Premier Elite
Restoration coatings
BBB A+ · CTRCA Member
Accountability
Why ARP
Why New Braunfels Building Owners Choose ARP for Metal
Metal is one of the systems ARP installs as part of its commercial roofing in New Braunfels, and most metal-roof calls here start with a property manager who's tired of chasing the same leak at the same seam. Metal almost never fails across the open field — it fails at the details, where two panels meet and where a panel dies into a wall, a curb, or a penetration. That's exactly where ARP built its edge.
ARP roll-forms its own standing seam and R-panel on site, on ARP's own roll-forming equipment, run by a dedicated metal foreman. The panel that goes on your Comal County building is cut to your building's exact roofline — not ordered to a stock length and then stretched or end-lapped to fit. A foreman who does nothing but metal owns the seams, the flashings, and the closures, because that's where a metal roof is won or lost.
And every metal project is documented before, during, and after: a photographed condition report going in, a written scope, and a walkthrough at the end you can hand straight to ownership. More than 5,000 completed roofing projects across Texas, 300+ five-star reviews, and A+ BBB standing sit behind that promise.
The Right Fit
Standing Seam, R-Panel, and Structural Metal for Comal County Buildings
Not every commercial building wants the same metal, and the right profile comes down to slope, span, and how exposed the roof is.
- Standing seam hides its fasteners under a raised, mechanically seamed rib, which is why it's the go-to for primary and occupied buildings and for lower slopes where water lingers. Site roll-formed, the panel runs your roofline in one continuous length wherever the run allows — fewer end-laps, fewer places to leak.
- R-panel carries its fasteners on the face (an exposed-fastener profile), which makes it the economical, fast-cover choice for agricultural, warehouse, and light-industrial structures.
- Structural (trapezoid) standing seam spans open framing and carries higher loads on low-slope metal buildings where the panel is doing structural work, not just shedding water.
On finish, two terms matter and they aren't the same thing. Galvalume is the aluminum-zinc mill coating bonded to the steel — the natural, unpainted silver you see on ag buildings. A Kynar 500 / PVDF factory color coat goes over that Galvalume for a fade-resistant painted finish, and it adds roughly $1.50 to $3.00 per square foot. And when you already have one sound layer of metal up there, a metal-over-metal retrofit — a Roof Hugger sub-framing system — can recover over it without a full tear-off.
Installed Cost
What Commercial Metal Roofing Costs in New Braunfels
A standing seam metal roof in New Braunfels runs about $7.50 to $13.00 per square foot of roof area installed, so a 2,500-square-foot building lands roughly $24,500 to $42,500. Final price moves with existing roof and deck condition, slope and span, panel gauge and profile, and roof access.
| Metal system | Per sq ft of roof area | 2,500 sq ft building |
|---|---|---|
| Standing seam — Galvalume (natural mill finish) | $7.50–$9.00/sq ft | $24,500–$29,500 |
| Standing seam — colored (Kynar / PVDF factory coat) | $9.00–$13.00/sq ft | $29,500–$42,500 |
| R-Panel (exposed-fastener, ag / industrial) | $7.00–$9.00/sq ft | $23,000–$29,500 |
| Trapezoid (structural low-slope, high-load) | $11.00–$15.00/sq ft | $36,000–$49,000 |
| Metal-over-metal retrofit (Roof Hugger recover) | $10.00–$12.00/sq ft | — |
Those are August 2026 New Braunfels ranges. A 5,000-square-foot standing-seam roof runs about $49,000 to $85,500 at the same quality. Steep or architectural metal picks up a pitch factor (roughly ×1.20), and it's worth remembering that metal is sized by the actual roof area it covers, not by your building's air-conditioned footprint. Every metal number here already assumes substrate prep, new flashing and closures, and cleanup. For the full metal pricing breakdown across every variable — gauge, profile, deck, and access — see commercial metal roofing.
How Your New
How Your New Braunfels Metal Roof Gets Built
Metal is a three-move job when it's done right, and you'll see each move happen.
- Site roll-forming. Your panels are formed on site on ARP's own roll-forming equipment, cut to the exact lengths your roofline calls for — so the metal is matched to your building instead of your building being matched to stock metal.
- Foreman-supervised install. The dedicated metal foreman sets the panels, sequences the fastening, and owns the seams and terminations as they go up. Those are the details that decide whether the roof stays dry.
- Seam-and-flashing detailing plus a documented walkthrough. Flashings, closures, and penetrations get detailed and checked, then you get a photographed final walkthrough and a written scope of exactly what was installed.
Down the road, a lifted seam or a wind-caught panel edge is a targeted panel repair, not a reason to reroof — and ARP will tell you which one you're actually looking at.
Book Your Free
Book Your Free New Braunfels Commercial Metal Assessment
Tell us the building and what the roof's doing, and ARP will walk it, document what's actually up there, and hand you a written metal scope — no pressure, no obligation.
Book My Commercial Metal Assessment · 📞 (830) 293-4621
ARP Roofing & Remodeling — Serving New Braunfels & Comal County 📞 (830) 293-4621
Estimate your New Braunfels project
What a commercial metal roof costs in New Braunfels
The honest answer is a range until someone measures your roof — anyone quoting a firm price over the phone is guessing. Move the estimator to price your own project against our 2026 New Braunfels rates, then send it over and we'll confirm it on the roof.
| System | Installed / sq ft | Where it fits |
|---|---|---|
| GAF EverGuard TPO / single-ply | $8.00 to $14.00 | Low-slope membrane, heat-welded seams |
| Commercial metal (site-formed) | $11.00 to $18.00 | Standing-seam for steeper commercial roofs |
| Silicone / acrylic restoration coating | $3.50 to $6.00 | Restoration-eligible substrate only |
| Flat-priced commercial repair | $1,500 to $3,500 per job | Priced after an on-roof inspection |
Read the units
Ranges are per square foot of actual roof area — the low-slope or steep surface a crew installs. Flat-priced repair is per job, not per foot. Coating rates assume a restoration-eligible substrate confirmed on the roof.
Price your New Braunfels roof & book the visit
2026 New Braunfels rates. About 40 seconds.
Roof area used: 12,000 sq ft — low-slope roofs run close to footprint
Adjust roof size to see your price
Your 2026 New Braunfels range
Request in — we'll text to confirm
Need it sooner? Call or text (830) 293-4621.
Four things move your number
Driver 01
Roof size and pitch
Steeper means slower and safer, which costs more.
Driver 02
Material
The single biggest lever, and the one you actually choose.
Driver 03
Decking condition
Found at tear-off, photographed, and shown to you before any replacement.
Driver 04
Access
If your roof is hard to reach or the property is tight.
Honest fit check
Is ARP the right fit for your New Braunfels project?
The best way to judge any New Braunfels contractor — us or anyone else — is to ask for a written scope, ask who your single point of contact is, and ask when the manufacturer warranty gets registered in your name. If a roofer can't answer those three plainly, that's your answer.
Yes — we're a match
A good fit if you
- Want a roofer your New Braunfels neighbors have actually used — not a pop-up tent after the last hailstorm.
- Want everything documented and in writing, with photos, before any crew gets on the roof.
- Plan to stay in your New Braunfels home or hold the property long term.
- Had recent hail or wind damage and want it documented correctly for your carrier.
No — we'll say so up front
Not the right fit if you
- Need a commercial job below our minimum repair scope, or a firm residential repair price over the phone — we quote every repair after an on-roof inspection.
- Need someone to start tomorrow with no inspection.
- Are choosing purely on the lowest bid, without reading the scope underneath it.
- Want a contractor to pay, waive or "take care of" your deductible — a criminal offense in Texas under Business & Commerce Code § 27.02.
We'd rather tell you that on the phone than waste a walkthrough.
No cost, no obligation
Your free New Braunfels commercial roof assessment
A free New Braunfels commercial roof assessment costs nothing and comes with no obligation. A project manager gets on the roof, photographs the condition, and gives you a written report you can take to ownership — whether or not you move forward with us.
We check the panel seams, fasteners, and flashings a metal system lives and dies on, and flag where a coating or a section repair buys you years before a full reroof is warranted.
On commercial work the written scope is COO-reviewed, so the number and the plan you get are ones we stand behind before any crew mobilizes.
From assessment to warranty
1
Free Storm Shield Assessment
We measure your roof, photograph it, and document what's actually there — not a curbside guess. You get the photo set whether you hire us or not.
2
Written Scope Before Any Work
You'll see line-item scope, materials, warranty options, and a real number in writing. On commercial projects that document is COO-reviewed. Nothing starts until you've read it.
3
Install and Warranty Registration
A crew led by an ARP project manager does the work, pulls the New Braunfels permit, and inspects at the key stages — then your manufacturer warranty registers in your name within 30 days.
No fee, no deposit, no pressure. We confirm your address is covered before we schedule — then a project manager walks the roof.
Questions that decide the job
New Braunfels roofing — frequently asked questions
How much does a commercial metal roof cost in New Braunfels?
+
Standing seam runs about $7.50 to $13.00 per square foot of roof area, so a 2,500-square-foot building lands roughly $24,500 to $42,500 installed. The final number comes from a walkthrough, not a phone call, because deck condition, slope and span, gauge, and access all move it.
Does ARP make its own commercial metal panels?
+
Yes. ARP roll-forms standing seam and R-panel on site to your exact roofline on ARP's own roll-forming machine, run by a dedicated metal foreman — so the panel is cut to your building instead of stretched from a stock length.
Standing seam or R-panel for my New Braunfels building?
+
Standing seam, with its concealed fasteners, is the pick for primary or occupied buildings and lower slopes; R-panel, with exposed fasteners, is the economical choice for agricultural, warehouse, and budget structures. ARP recommends by slope, span, and exposure after walking the roof.
Can you re-roof metal-over-metal without a full tear-off?
+
Often yes. A metal-over-metal retrofit (a Roof Hugger sub-framing recover) can go over one sound existing layer, but a documented deck and condition check decides whether recover or a full tear-off and replacement is the honest call for your building.
Still exploring?
Want the complete guide to commercial metal roofing?
Our statewide commercial metal roofing guide goes deep on materials, cost, lifespan, and how each choice holds up in Texas — the full answers behind this New Braunfels page.
Explore your New Braunfels roof
Start where your question is
Every door lands on one written scope — pick the one that fits where you are right now.
01
Commercial Gutters in New Braunfels
If water is spilling over your gutters, pooling at the base of the building, or finding its way behind the fascia, the problem is almost never the roof membrane — it's drainage that was never sized to the load. Here's how ARP fixes that.
See Commercial Gutters in New Braunfels →02
Commercial Roof Coatings in New Braunfels
If a coating salesman quoted your building before anyone scanned the roof for trapped moisture, you were sold a product — not a documented restoration. Here's how ARP decides whether your roof is actually a candidate.
See Commercial Roof Coatings in New Braunfels →03
Commercial Roof Repair in New Braunfels
If you manage a building in New Braunfels and a roof that won't stop leaking, the real question isn't how fast someone can get up there — it's whether they'll tell you the truth about what they find.
See Commercial Roof Repair in New Braunfels →04
Commercial Roof Replacement in New Braunfels
If you manage a building in New Braunfels and the roof is at the end of its life, the first decision isn't who to hire — it's which reroof you actually need. Here's how that call gets made.
See Commercial Roof Replacement in New Braunfels →05
Commercial Storm Damage Roofing in New Braunfels
A stain on a tenant's ceiling is the symptom. The question your board is going to ask is what actually happened up there — and here's how ARP answers it in writing.
See Commercial Storm Damage Roofing in New Braunfels →Book your free New Braunfels commercial roof assessment
Photo-documented, with a written condition report in hand — whether or not you hire us.
