Deliverable 01 · Photo set
Photographs of every defect
Close enough to see the damage, wide enough to show where it sits on your roof.
Kerrville, Texas
Kerrville Metal Roofing
A metal roof suits Kerr County's hail, sun, and ranch-country roofs — and ARP roll-forms its own standing-seam panels on site, then installs them under a dedicated metal foreman. That is a workmanship credential: metal is ARP's own fabrication and detail work. 5,000+ completed Texas projects.
Family owned, locally accountable
COO & President — the father and son behind ARP
Why these credentials are on this page
5,000+
Completed projects
4.9★
300+ five-star reviews
GAF Certified Plus
Manufacturer standing
Atlas PRO+ Platinum Select
Second shingle line
BBB A+ · CTRCA Member
Accountability
Standing-Seam Metal Roll-Formed
Standing-Seam Metal, Roll-Formed for Your Kerrville Roof
Metal is a system where the details decide everything, so the honest question is not which badge is on the box — it is who forms the panel and who runs the seams. As your Kerrville roofing company, ARP roll-forms its own standing-seam and exposed-fastener panels on site, on ARP's own roll-forming machine, cut to the runs on your Kerrville roof, and a dedicated metal foreman supervises the install: the clips, the flashing, the fastening pattern, and every seam that actually keeps water out.
What stands behind your metal roof is ARP's own roll-forming, the foreman running the crew on your property, a written workmanship warranty, and the manufacturer warranties that come with the metal system's own panels and finishes. That is a company credential you can hold us to.
For the full material breakdown — profiles, gauges, and finishes — see our residential metal roofing guide.
Why ARP
Why Kerrville Homeowners Choose ARP for Metal Roofing
Metal is a long-term decision, and Kerr County homeowners choose ARP because the company standing behind the panel is the same one that formed it and supervised the seam. That is 5,000-plus completed Texas projects and 300-plus five-star reviews behind your roof, not a promise about how close a truck is parked. On a metal roof, the years that matter come long after the crew leaves — and the details that fail early are the ones nobody supervised.
A roof that fails in year six isn't a product failure. It's an install failure. That's why we own the outcome — from the first walkthrough to the final warranty, every job is supervised start to finish.
Preston Williams · President, ARP Roofing & Remodeling
Installed Cost
What Metal Roofing Costs in Kerrville
A premium standing-seam metal roof on a typical 2,000 square foot Kerrville home runs about $26,400 to $46,400 installed. The spread depends on panel profile and finish — mill-finish Galvalume at the low end, factory-color Kynar 500 (PVDF) at the high end — plus pitch and roof complexity. Priced August 2026, Texas Hill Country.
Metal costs more up front than shingle and lasts far longer, so the number is best read as decades of roof, not a single install. What moves the range is the panel profile and finish: mill-finish Galvalume — the metallic coating bonded to the steel — sits at the low end, and a factory-color Kynar 500 (PVDF) finish coat adds a premium on top of it. Pitch and roof complexity move it further.
| Home size (A/C) | Premium metal, installed (Kerrville) |
|---|---|
| 1,500 sq ft (~2,400 roof area) | $19,800 – $34,800 |
| 2,000 sq ft (~3,200 roof area) | $26,400 – $46,400 |
| 2,500 sq ft (~4,000 roof area) | $33,000 – $58,000 |
| 3,000 sq ft (~4,800 roof area) | $39,600 – $69,600 |
By material, standing-seam Galvalume runs about $7.60 to $9.00 per square foot of roof area, standing-seam colored Kynar/PVDF about $8.25 to $14.50, and exposed-fastener R-panel about $6.75 to $8.00. Every figure here is a full-system installed price — tear-off, underlayment, flashing, permit, and cleanup included — priced August 2026 for the Kerrville area, and stated as roof area, not living-space square footage.
Want a number for your own roof? Run it on the roof replacement calculator for an instant installed range.
How Your Kerrville
How Your Kerrville Metal Roof Install Works
Metal rewards a supervised process, and yours runs in three steps:
- Inspection and scope. We photograph and measure your roof, confirm the profile and finish that fit your home, and hand you a written scope with the installed range in it — no verbal ballparks.
- Roll-forming and install. Your panels are roll-formed to the exact runs on your roof, and the dedicated metal foreman supervises the clips, flashing, and every seam through the install.
- Walkthrough and warranty. We walk the finished roof with you, register the metal system's manufacturer warranties in your name, and back the workmanship in writing.
Already know shingle is more your budget? Compare it against your other options on our Kerrville roof replacement page.
Is a Metal
Is a Metal Roof Right for Your Kerrville Home?
Metal is not the right call for every Kerrville roof, and we would rather say so than sell you one. It is a strong fit if you are staying in the home long term and want a roof that can run 40 to 70 years, shrug off hail and Kerr County sun, and outlast two or three shingle roofs in the same span. For a home you plan to hold, the up-front premium spreads across decades of service.
It is probably the wrong fit if your horizon is short — if you are likely to sell inside a few years, a quality Class 4 shingle roof recovers more of its cost and still handles the hail. The deciding factor is almost never the panel; it is how long you plan to own the roof.
Estimate your Kerrville project
What a metal roof costs in Kerrville
A metal roof is priced per square foot of roof area, and the system you choose is the biggest lever. Price standing-seam or stone-coated metal against our 2026 Kerrville rates, then send it over and we'll confirm it on the roof.
| Metal system | Installed / sq ft | Texas lifespan |
|---|---|---|
| Standing seam metal | $7.60 to $14.50 | 40 to 70 years |
| Stone-coated metal | $9.00 to $12.50 | 40 to 60 years |
Read the units
Ranges are per square foot of actual roof area — the surface a crew installs, not your living-space square footage. Roof area runs roughly 1.3 to 1.7 times your living-space footage once the garage, overhangs and pitch are counted, so price off installed totals rather than multiplying house size by the per-foot rate.
Price your Kerrville roof & book the visit
2026 Kerrville rates. About 40 seconds.
Roof area used: 3,200 sq ft — typical pitch adds about 60% over heated area
Adjust roof size to see your price
Your 2026 Kerrville range
Request in — we'll text to confirm
Need it sooner? Call or text (830) 293-4621.
Four things move your number
Driver 01
Roof size and pitch
Steeper means slower and safer, which costs more.
Driver 02
Material
The single biggest lever, and the one you actually choose.
Driver 03
Decking condition
Found at tear-off, photographed, and shown to you before any replacement.
Driver 04
Access
If your roof is hard to reach or the property is tight.
Making it affordable
Financing your new metal roof
A metal roof is a decades-long investment, and you probably don't want to drain your savings for one up front — especially when an insurance deductible lands on top of the bill.
That's why we offer roof financing: if you qualify, you can put on the metal roof you actually want now and pay it off in manageable monthly payments instead of one large check — no dropping to a shorter-lived material just to fit your budget.
See our metal-roof financing options →Honest fit check
Is ARP the right fit for your Kerrville project?
The best way to judge any Kerrville contractor — us or anyone else — is to ask for a written scope, ask who your single point of contact is, and ask when the manufacturer warranty gets registered in your name. If a roofer can't answer those three plainly, that's your answer.
Yes — we're a match
A good fit if you
- Want a roofer your Kerrville neighbors have actually used — not a pop-up tent after the last hailstorm.
- Want everything documented and in writing, with photos, before any crew gets on the roof.
- Plan to stay in your Kerrville home or hold the property long term.
- Had recent hail or wind damage and want it documented correctly for your carrier.
No — we'll say so up front
Not the right fit if you
- Need a commercial job below our minimum repair scope, or a firm residential repair price over the phone — we quote every repair after an on-roof inspection.
- Need someone to start tomorrow with no inspection.
- Are choosing purely on the lowest bid, without reading the scope underneath it.
- Want a contractor to pay, waive or "take care of" your deductible — a criminal offense in Texas under Business & Commerce Code § 27.02.
We'd rather tell you that on the phone than waste a walkthrough.
No cost, no obligation
Your free Kerrville roof inspection
A free Kerrville roof inspection from ARP costs nothing whether or not you move ahead with metal. A project manager walks the roof, photographs the condition, and gives you a straight written answer on whether a metal system is the right call for your home.
We measure the roof for panel layout and check the framing and decking a standing-seam system will sit on, so the number you get later reflects your actual roof — not a square-footage guess off a map.
You also get the honest verdict when a repair or a shingle reroof serves you better than metal — we'd rather tell you that up front than sell you a system you don't need.
From assessment to warranty
1
Free Storm Shield Assessment
We measure your roof, photograph it, and document what's actually there — not a curbside guess. You get the photo set whether you hire us or not.
2
Written Scope Before Any Work
You'll see line-item scope, materials, warranty options, and a real number in writing. Nothing starts until you've read it.
3
Install and Warranty Registration
A crew led by an ARP project manager does the work, pulls the Kerrville permit, and inspects at the key stages — then your manufacturer warranty registers in your name within 30 days.
No fee, no deposit, no pressure. We confirm your address is covered before we schedule — then a project manager walks the roof.
Questions that decide the job
Kerrville roofing — frequently asked questions
How much does a metal roof cost in Kerrville?
+
A premium standing-seam metal roof on a typical 2,000 square foot Kerrville home runs about $26,400 to $46,400 installed. The biggest driver is panel finish — mill-finish Galvalume at the low end, factory-color Kynar 500 (PVDF) at the high end — plus pitch and roof complexity. Run your own roof on the roof replacement calculator for an instant installed range.
Does ARP make its own metal panels?
+
Yes. We roll-form standing-seam panels on site, on ARP's own roll-forming machine, cut to the exact runs on your roof, and a dedicated metal foreman supervises the install. That is a company workmanship credential. Your metal roof is backed by ARP's roll-forming, a written workmanship warranty, and the metal system's own manufacturer warranties.
How long does a metal roof last in Kerrville?
+
A 40-to-70-year service life is typical for quality metal in Texas — the panel routinely outlives a shingle roof. Metal failures are almost always at the details, not the panel: the seams, flashing, and fastening. Done right and supervised through the install, a Kerrville metal roof lasts the life of the roof.
Standing seam or exposed-fastener for my Kerrville home or ranch building?
+
Standing seam, with its concealed clips and hidden fasteners, is the choice for homes — cleaner, tighter, and longer-lived. Exposed-fastener R-panel is the economical fit for barns, outbuildings, and ag or ranch structures — the workhorse profile across Kerr County ranch country.
Do I need a permit for a metal roof in Kerrville?
+
Yes — a metal reroof in Kerrville requires the applicable municipal permit, and we pull the required permit for you as part of the job. We manage the timing so it does not slow your project down, and the permit handling is written into your scope so there are no surprises.
Still exploring?
Want the complete guide to residential metal roofing?
Our statewide residential metal roofing guide goes deep on materials, cost, lifespan, and how each choice holds up in Texas — the full answers behind this Kerrville page.
Explore your Kerrville roof
Start where your question is
Every door lands on one written scope — pick the one that fits where you are right now.
01
Kerrville Commercial Roofing
Commercial roofing for Kerrville and Kerr County — TPO, metal, coatings, and repairs, scoped in writing with a documented condition report.
See Kerrville Commercial Roofing →02
Kerrville Seamless Gutters
Seamless aluminum gutters for Kerrville and Kerr County — formed on your driveway to your fascia's exact run, hung for a Texas downpour and priced by the foot.
See Kerrville Seamless Gutters →03
Kerrville Roof Repair
Roof leak and storm repair in Kerrville and across Kerr County — flat-priced jobs, a photo-documented diagnosis, and a written scope before any work starts.
See Kerrville Roof Repair →04
Kerrville Roof Replacement
What a roof replacement costs in Kerrville and across Kerr County — architectural shingle, Class 4 impact-rated, and metal ranges, with a written scope.
See Kerrville Roof Replacement →05
Kerrville Shingle Roofing
Architectural and Class 4 impact-rated shingle roofing for Kerrville and Kerr County — hail-country protection that can earn a carrier premium credit.
See Kerrville Shingle Roofing →06
Shingle Roofing in Texas
The most common Texas roof, and how to buy one that lasts.
See Shingle Roofing in Texas →Book your free Kerrville roof assessment
Photo-documented, with a written condition report in hand — whether or not you hire us.
