Deliverable 01 · Photo set
Photographs of every defect
Close enough to see the damage, wide enough to show where it sits on your roof.
San Antonio, Texas
San Antonio Commercial Metal Roofing — Site-Formed Standing Seam & R-Panel
If you manage a warehouse, plant, or retail box in San Antonio, here's how ARP builds a commercial metal roof matched to your deck — not to whatever length showed up on the truck.
Yes — ARP roll-forms standing seam and R-panel commercial metal roofs on its own equipment across San Antonio and Bexar County. Panels are cut to the exact run of your deck, specced in writing, and installed under one ARP project manager. Book your commercial metal assessment.
Family owned, locally accountable
COO & President — the father and son behind ARP
Why these credentials are on this page
5,000+
Completed projects
4.9★
300+ five-star reviews
GAF GoldElite Commercial
Manufacturer standing
UNIFLEX Premier Elite
Restoration coatings
BBB A+ · CTRCA Member
Accountability
Why ARP
Why Choose ARP for Your San Antonio Commercial Metal Roof
A commercial metal roof is a forty-plus-year decision, and ARP's commercial roofing in San Antonio team treats it that way. If it leaks at a seam or lands over budget, you're the one explaining it to ownership.
With 5,000+ projects, ARP brings a seasoned commercial crew and its own metal shop to every Bexar County job. For metal, the difference is that shop:
- Our own roll-forming — standing seam and R-panel formed on ARP's own equipment, cut to your exact deck length, so long runs aren't stitched from stock.
- Finish matched to the building — natural Galvalume (the metallic coating that protects the steel) where budget leads, or a factory Kynar 500/PVDF color coat where fade resistance and appearance matter.
- Built for heat and hail — a standing seam system takes the thermal cycling and large-span hail exposure that punish a big flat roof.
From distribution roofs along the I-35 and I-10 industrial corridors to facilities at Port San Antonio and Brooks, ARP site-forms metal for the buildings that anchor San Antonio's industrial base.
When we roll-formed the standing seam for a distribution building off I-35, every panel came off our own machine cut to the exact length of that deck. No cross-seams stitched in because a truck showed up with forty-foot stock. On a roof that size, in San Antonio heat, the seams you don't add are the leaks you never have to chase.
Randal Williams · COO, ARP Roofing & Remodeling
How It Works
How San Antonio Commercial Metal Roofing Works
Three steps, and every one is on paper before a panel goes down.
1
Inspect. An ARP project manager climbs your roof and checks the deck, structure, slope, spans, and drainage, then measures for the panel runs your building needs.
2
Choices. We walk the profile, gauge, and finish choices with you: standing seam or R-panel, natural Galvalume or a factory Kynar color coat. The scope goes in writing before anything is formed.
3
Install. Panels are site-formed on ARP's own roll-forming equipment to your deck length, then set by ARP's own supervised crews under one project manager. The manufacturer system warranty is registered when the job closes.
Commercial metal in San Antonio is quoted per square foot. Site-formed Galvalume or R-panel sits in the high single digits, while a colored Kynar or structural profile runs into the low-to-mid teens. Your deck, slope, and finish set where you land — our commercial metal cost guide breaks down what moves the number, and the commercial metal roofing systems guide shows how the systems compare.
Metal vs Flat
Metal vs. Single-Ply for a San Antonio Commercial Building
Not every commercial roof should be metal, and the right call comes down to slope and hold horizon. A standing seam metal roof needs enough slope to shed water and costs more up front than a single-ply membrane — but on a building you plan to hold for decades, it delivers a forty-plus-year service life and shrugs off the large-span hail and thermal cycling that wear a flat roof faster. A reflective or Kynar-finished metal roof also sheds San Antonio's summer heat, easing the cooling load on a big-footprint building.
For a low-slope warehouse, office, or retail box, a reflective TPO or restoration coating is often the more economical answer — see San Antonio TPO roofing or weigh systems on our San Antonio commercial roof replacement page. On a sloped structure held for the long term, metal wins the lifetime math. ARP cores and measures your building, then specs the system that actually fits it.
Vetting a Local Roofer
Choosing a Commercial Metal Roofing Contractor in San Antonio
Search "commercial metal roofing contractors San Antonio" or "commercial metal roofing companies San Antonio" and you'll get a list — but a big metal roof is unforgiving of a bad installer. Panels stitched from truck-length stock instead of site-formed to the deck add cross-seams that leak; fasteners driven wrong on an R-panel back out under thermal cycling. Before you hire a commercial metal roofing contractor in San Antonio, confirm they:
- Site-form or source panels to your exact deck length, not truck-length stock stitched together
- Install to the manufacturer spec that keeps the panel and finish warranties intact
- Carry current general-liability and workers' comp coverage
- Can show you finished San Antonio commercial metal roofs — warehouses and industrial buildings, not just houses
ARP runs its own roll-forming shop and a seasoned commercial crew, with 5,000+ completed projects. Our San Antonio team forms your panels to length, installs under one project manager, and registers the manufacturer system warranty in your name — the record your ownership can hold us to.
Estimate your San Antonio project
What a commercial metal roof costs in San Antonio
The honest answer is a range until someone measures your roof — anyone quoting a firm price over the phone is guessing. Move the estimator to price your own project against our 2026 San Antonio rates, then send it over and we'll confirm it on the roof.
| System | Installed / sq ft | Where it fits |
|---|---|---|
| GAF EverGuard TPO / single-ply | $8.00 to $14.00 | Low-slope membrane, heat-welded seams |
| Commercial metal (site-formed) | $11.00 to $18.00 | Standing-seam for steeper commercial roofs |
| Silicone / acrylic restoration coating | $3.50 to $6.00 | Restoration-eligible substrate only |
| Flat-priced commercial repair | $1,500 to $3,500 per job | Priced after an on-roof inspection |
Read the units
Ranges are per square foot of actual roof area — the low-slope or steep surface a crew installs. Flat-priced repair is per job, not per foot. Coating rates assume a restoration-eligible substrate confirmed on the roof.
Price your San Antonio roof & book the visit
2026 San Antonio rates. About 40 seconds.
Roof area used: 12,000 sq ft — low-slope roofs run close to footprint
Adjust roof size to see your price
Your 2026 San Antonio range
Request in — we'll text to confirm
Need it sooner? Call or text (210) 714-0040.
Four things move your number
Driver 01
Roof size and pitch
Steeper means slower and safer, which costs more.
Driver 02
Material
The single biggest lever, and the one you actually choose.
Driver 03
Decking condition
Found at tear-off, photographed, and shown to you before any replacement.
Driver 04
Access
If your roof is hard to reach or the property is tight.
Honest fit check
Is ARP the right fit for your San Antonio project?
The best way to judge any San Antonio contractor — us or anyone else — is to ask for a written scope, ask who your single point of contact is, and ask when the manufacturer warranty gets registered in your name. If a roofer can't answer those three plainly, that's your answer.
Yes — we're a match
A good fit if you
- Want a roofer your San Antonio neighbors have actually used — not a pop-up tent after the last hailstorm.
- Want everything documented and in writing, with photos, before any crew gets on the roof.
- Plan to stay in your San Antonio home or hold the property long term.
- Had recent hail or wind damage and want it documented correctly for your carrier.
No — we'll say so up front
Not the right fit if you
- Need a commercial job below our minimum repair scope, or a firm residential repair price over the phone — we quote every repair after an on-roof inspection.
- Need someone to start tomorrow with no inspection.
- Are choosing purely on the lowest bid, without reading the scope underneath it.
- Want a contractor to pay, waive or "take care of" your deductible — a criminal offense in Texas under Business & Commerce Code § 27.02.
We'd rather tell you that on the phone than waste a walkthrough.
No cost, no obligation
Your free San Antonio commercial roof assessment
A free San Antonio commercial roof assessment costs nothing and comes with no obligation. A project manager gets on the roof, photographs the condition, and gives you a written report you can take to ownership — whether or not you move forward with us.
We check the panel seams, fasteners, and flashings a metal system lives and dies on, and flag where a coating or a section repair buys you years before a full reroof is warranted.
On commercial work the written scope is COO-reviewed, so the number and the plan you get are ones we stand behind before any crew mobilizes.
From assessment to warranty
1
Free Storm Shield Assessment
We measure your roof, photograph it, and document what's actually there — not a curbside guess. You get the photo set whether you hire us or not.
2
Written Scope Before Any Work
You'll see line-item scope, materials, warranty options, and a real number in writing. On commercial projects that document is COO-reviewed. Nothing starts until you've read it.
3
Install and Warranty Registration
A crew led by an ARP project manager does the work, pulls the San Antonio permit, and inspects at the key stages — then your manufacturer warranty registers in your name within 30 days.
No fee, no deposit, no pressure. We confirm your address is covered before we schedule — then a project manager walks the roof.
Questions that decide the job
San Antonio roofing — frequently asked questions
Is standing seam or R-panel better for my San Antonio building?
+
It depends on slope and use — standing seam suits low-slope-to-steep commercial roofs and hides its fasteners, while R-panel is an economical exposed-fastener choice for agricultural and industrial buildings. ARP site-forms both and specs the right one after walking your roof. Book an assessment.
How much does a commercial metal roof cost in San Antonio?
+
It's quoted per square foot, and profile and finish drive the number — Galvalume standing seam and R-panel sit lower, colored Kynar and structural profiles higher. Deck, slope, and access move it too. We measure it and hand you a written scope. Book a commercial metal assessment.
Does a metal roof handle San Antonio hail and heat?
+
Yes — a properly gauged standing seam system takes large-span thermal cycling and hail better than most flat membranes, which is why it's common on I-35 and I-10 industrial roofs. Book your metal assessment.
Do you pull the permit for commercial metal work in San Antonio?
+
Yes — ARP files through the City of San Antonio Development Services Department at 1901 S. Alamo Street and manages the inspection timing so your project doesn't stall. Headquartered at 11 Spanish Pass Rd, Boerne, TX 78006, ARP serves Bexar, Kendall, and Comal counties. Book an assessment.
How long does a commercial metal roof last in San Antonio?
+
A properly installed standing seam commercial metal roof lasts 40-plus years in San Antonio (SATX) — well beyond the 20-to-30-year life of a single-ply membrane in the same Bexar County heat and hail. A Kynar 500 (PVDF) finish holds its color for decades, and the panel warranty depends on the finish and gauge. On a building you plan to hold long term, that longevity is the whole investment case. Book a metal assessment.
Can a metal roof lower cooling costs on my San Antonio building?
+
Often, yes. A reflective or light Kynar-finished metal roof bounces San Antonio's summer sun instead of soaking it up, which can ease the cooling load on a large-footprint warehouse or retail building through a Texas summer. The savings depend on your insulation and HVAC, but the reflectivity is real in Bexar County heat. Book an assessment.
Can you retrofit metal over my existing commercial roof?
+
Sometimes — a metal retrofit over a sound existing roof or with a sub-framing system can avoid a full tear-off, but only when the deck and structure carry the load. ARP checks the structure and deck first, then tells you honestly whether a metal retrofit or a tear-off is the right call for your San Antonio building. Book an assessment.
Still exploring?
Want the complete guide to commercial metal roofing?
Our statewide commercial metal roofing guide goes deep on materials, cost, lifespan, and how each choice holds up in Texas — the full answers behind this San Antonio page.
Explore your San Antonio roof
Start where your question is
Every door lands on one written scope — pick the one that fits where you are right now.
01
San Antonio Commercial Roof Coatings & Restoration
If you manage a San Antonio building with a sound but aging flat roof, here's how a restoration coating protects your asset — without a full tear-off.
See San Antonio Commercial Roof Coatings & Restoration →02
San Antonio Commercial Roof Repair
If you manage a San Antonio building with a flat roof, here's how ARP finds the real leak, fixes it, and keeps your tenants open while we work.
See San Antonio Commercial Roof Repair →03
San Antonio Commercial Roof Replacement
If you manage an aging San Antonio building, here's how ARP decides between a recover and a full tear-off before your reroof starts.
See San Antonio Commercial Roof Replacement →04
San Antonio TPO Roofing
If you manage a San Antonio building with a flat roof, here's how ARP handles your TPO — from the first walkthrough to the warranty on your seams.
See San Antonio TPO Roofing →Book your free San Antonio commercial roof assessment
Photo-documented, with a written condition report in hand — whether or not you hire us.
