# What Does Commercial Storm Damage Roof Repair Cost in Texas?

Source: https://arproofing.com/commercial-roofing-contractor/storm-damage/cost/

Last updated October 2026

Family-owned · Serving Texas

Commercial storm damage repair in Texas runs $1,295 to $3,495 flat for emergency stabilization: tarping, dry-in, and leak control the day the storm clears. Sectional repairs are flat-priced from the $1,295 commercial minimum. A totaled membrane moves to replacement at $9 to $20 per square foot installed. Damage extent, deck condition, and access set the final number.

[Free Inspection & Estimate →](https://arproofing.com/book/)

[Call (210) 714-0040](tel:+12107140040)

## The proof behind the promise

4.9★

300+ five-star reviews

5,000+

Completed projects

GAF GoldElite Commercial

Manufacturer standing

UNIFLEX Premier Elite

Restoration coatings

BBB A+ · CTRCA Member

Accountability

| Storm response | Basis | Typical cost (Texas, 2026) |
| --- | --- | --- |
| **Emergency stabilization** (tarping, dry-in, leak control) | Flat job total | $1,295 – $3,495 |

Installed Cost

## What Storm Damage Repair Costs on a Commercial Roof in Texas

Emergency commercial storm stabilization in Texas runs $1,295 to $3,495 as a flat job total, covering temporary tarping, dry-in, and leak control. It is priced by the job, not by roof area, so your building size does not multiply it. Updated September 2026.

Here is the thing about a storm bill: it is not one number, it is a ladder, and where your roof lands on it is a condition question, not a menu choice. The first rung is stabilization, the work that stops the water the day the storm clears. That is flat-priced, because the job is the job whether your building is 5,000 square feet or 50,000: get a tarp and a dry-in over the breach, control the active leaks, and buy your building time before the next front. This is one step inside ARP's broader [commercial storm damage response](https://arproofing.com/commercial-roofing-contractor/storm-damage/).

Updated September 2026, Texas pricing. Notice the word flat. Emergency stabilization is quoted as a job, not as a rate you multiply by your roof area, and that matters because the wrong mental model is how property managers end up bracing ownership for a number ten times higher than the actual work. What moves this range is access and severity: a two-story building with craned staging and multiple breaches sits at the top; a single failure on an open, ground-accessible warehouse sits at the bottom. The premium exists because someone is on your roof in weather, fast.

![Aerial view of a tarped section on a storm-damaged commercial flat roof](https://arproofing.com/_astro/flat-roof-tarp-damage-aerial.Dl2Asfwl_Z1DhlBB.webp)

Stabilization is the first rung: a tarp and dry-in stop the water the day the storm clears.

Installed Cost

## Stabilize, Repair, or Replace: The Three Storm Cost Tiers

Sectional commercial storm repairs in Texas are flat-priced by the job, with a $1,295 minimum: inside that job, a metal panel patch runs $400 to $1,800 as a line item, a membrane patch $500 to $2,000, and an HVAC curb reflash $750 to $3,000. A full section cut-and-replace starts at $5,000. Updated September 2026.

Once the water is stopped and the roof is dry, the real scope question opens: does the storm damage repair as a sectional fix, or did it total enough of the system to justify replacement? Most storms land in the middle tier. A hailstorm bruises a field of membrane, wind peels back a section of metal panel, a flying limb punches the deck, and the fix is sectional, flat-priced by the job. Hail specifically leaves a damage signature worth understanding on its own, which is why [commercial hail damage](https://arproofing.com/commercial-roofing-contractor/storm-damage/hail-damage/) gets its own breakdown.

| Sectional storm repair | Basis | Typical cost (Texas, 2026) |
| --- | --- | --- |
| Metal panel patch / fastener repair | Line item ($1,295 job minimum) | $400 – $1,800 |
| Membrane patch (puncture, single seam) | Line item ($1,295 job minimum) | $500 – $2,000 |
| HVAC curb flashing repair | Line item ($1,295 job minimum) | $750 – $3,000 |
| Drain or scupper repair | Line item ($1,295 job minimum) | $500 – $1,500 |
| Full-section cut-and-replace | Flat job total | $5,000 – $25,000+ |

Every commercial repair job carries a $1,295 minimum; the smaller items above are line items priced inside that job, not stand-alone calls. Updated September 2026, Texas pricing. No row here is a per-square-foot rate. These are the fixes that follow stabilization once the assessment tells us how far the storm actually reached. What moves the number is how many penetrations the storm touched, whether the wind opened a seam or lifted a whole field of panel, and how much wet insulation has to come out before the patch goes down. If your damage is widespread rather than sectional, this tier stops being the right tool and the conversation turns to replacement. You can see the full sectional menu on the [commercial roof repair](https://arproofing.com/commercial-roofing-contractor/roof-repair/) page.

Installed Cost

## When the System Is Totaled: What Full Replacement Costs

A totaled commercial roof in Texas is replaced at $14 to $20 per square foot all-in for a full tear-off, or $9 to $15 to recover over one sound existing layer. These are installed numbers that already fold in tear-off, insulation, flashings, permit, and disposal. Updated September 2026.

Sometimes a storm does not damage a roof, it ends one. A supercell that drives hail across an aged single-ply, or a wind event that strips a wide field of panel and saturates the insulation underneath, can push a roof past the point where patching is honest. At that point the pricing basis changes: replacement is quoted per square foot, all-in, because the scope is now the whole roof.

| Method | Installed range (all-in, per sq ft) | What it means |
| --- | --- | --- |
| **Tear-off & replace** | $14.00 – $20.00 | Strip the storm-damaged system to the deck, then build a new roof: membrane, insulation, flashings, disposal |
| **Lay-over / recover** | $9.00 – $15.00 | Install a new system over ONE sound existing layer (code caps you at two layers total) |

Translated into project totals, here is what a full storm replacement runs by building size. The square footage on your lease is conditioned floor area; your actual roof is larger once you account for the footprint and the low slope, so the table does that math (actual roof square feet equals leased area times 1.25 for footprint times 1.05 for a flat pitch).

At the Texas baseline, a totaled 10,000 square foot commercial roof (about 13,100 square feet of actual roof) runs roughly $184,000 to $262,500 for a full tear-off, or $118,000 to $197,000 to recover over one sound layer. Regional variance adds 3 to 10 percent. Updated September 2026.

**Texas baseline installed cost**

| Building Size (A/C) | Actual Sq Ft | Tear-off & Replace | Lay-over / Recover |
| --- | --- | --- | --- |
| 2,500 sq ft | ~3,300 sq ft | $46,000–$65,500 | $29,500–$49,000 |
| 5,000 sq ft | ~6,600 sq ft | $92,000–$131,500 | $59,000–$98,500 |
| 10,000 sq ft | ~13,100 sq ft | $184,000–$262,500 | $118,000–$197,000 |
| 20,000 sq ft | ~26,300 sq ft | $367,500–$525,000 | $236,500–$394,000 |
| 30,000 sq ft | ~39,400 sq ft | $551,500–$787,500 | $354,500–$590,500 |

Updated September 2026. These are final installed ranges at the Texas baseline. Regional variance across Texas runs roughly 3 to 10 percent over this baseline, driven mostly by local labor and staging, so nudge the budget up if your property sits in a higher-cost part of the state. Whether a recover qualifies depends on your existing layer count and whether the deck under the storm damage is dry and sound. The full method decision lives on the [commercial roof replacement](https://arproofing.com/commercial-roofing-contractor/roof-replacement/) page. Your final figure still moves with deck condition, drainage corrections, and roof access.

![A crew installing a new membrane system on a commercial flat roof after storm loss](https://arproofing.com/_astro/commercial-flat-roof-replacement-crew-work.D1bVxQlV_ZJGcqS.webp)

When the storm totals the system, pricing shifts to a per-square-foot full replacement.

Repair or Replace

## What Decides Whether You Repair or Replace After a Storm?

Two buildings can take the same storm and land on opposite sides of that line. Here is what actually decides it, so you can read your own estimate with a sharper eye.

**1. How far the water got.** A breach that soaked a few square feet of insulation is a patch. Widespread saturation under a wide field of membrane is a replacement, because sealing wet insulation under a new patch just moves the rot sideways.

**2. The age and condition of the system underneath.** Storm damage on a young, sound roof repairs cleanly. The same damage on a roof already near the end of its service life often tips the math toward replacement, because you would be patching a system that was going to fail on its own timeline anyway.

**3. Deck and structural condition.** What the storm did to the deck sets your prep cost. A punched or rotted deck is a line item before any new membrane goes down, and on a total loss it can pull the whole roof into a tear-off rather than a recover.

**4. The extent of the damage field.** Sectional damage stays sectional. Once the damaged area passes a threshold, a local repair-percentage rule (in jurisdictions that apply one, repairing or replacing more than 25 percent of a roof section in a 12-month window means the whole section has to meet current code) can force a fuller scope than the visible damage alone suggests. We check whether yours applies one at permit.

**5. Access and staging.** How material and crews get onto the roof moves the number on both repair and replacement. A ground-level building prices lower than a multi-story one where every load is craned over occupied space.

Storm & Insurance

## Is Storm Damage Covered by Insurance?

Here is the honest version. Sudden storm damage, the wind and hail that hits your roof in a datable event, is a covered peril on most commercial property policies. Slow wear, ponding, and age are maintenance items your policy treats differently. The line between the two is documentation, and that is work ARP does as your contractor of record: we photograph the damage, write the scope of what the storm actually did, and hand you a record your carrier can read. We work alongside your carrier, not against it, and the documentation belongs to you.

What ARP never does is touch your deductible. Texas Business and Commerce Code § 27.02 makes it a criminal offense for a roofer to advertise, pay, rebate, or waive any part of an insurance deductible, and Texas Insurance Code § 707.002 requires the insured to pay it. Any contractor who knocks after a storm offering to make your deductible disappear is telling you exactly how they operate. Pay the deductible, keep your documentation, and hire the contractor who put the scope in writing. The [Texas Department of Insurance](https://www.tdi.texas.gov/tips/can-a-contractor-waive-my-deductible.html) gives property owners the same warning.

Storm & Insurance

## What Is In and What Is Out of a Storm Repair Estimate?

A number is only as honest as the scope behind it. Before you compare two storm bids, make sure they cover the same work, because "storm repair" can quietly mean two very different jobs. Every ARP storm estimate puts the scope in writing before a contract is signed.

**What is in an ARP commercial storm estimate:**

- Emergency stabilization documented with photos before any permanent work
- Full storm-damage assessment and a written condition report
- The repair-or-replace scope, in writing, before you sign
- Manufacturer-specified repair or system for what the storm actually damaged
- All affected flashings: HVAC curbs, drains, pipes, and wall terminations
- Photo documentation packaged for your carrier submission
- Building permit, pulled in every ARP service area
- Manufacturer warranty registration on replacement work
- Final walkthrough, debris removal, and a magnetic sweep for storm-thrown fasteners

**What is usually out (and should be quoted separately if the storm caused it):**

- Interior water damage from the leak (drywall, insulation, tenant-space finishes)
- Structural or deck replacement beyond a stated allowance, if the assessment finds a failed deck
- Rooftop equipment that has to be lifted, reset, or re-curbed by a mechanical trade
- A full engineered drainage redesign, if the building's original drainage was undersized

None of that is padding. It is the difference between a quote that holds and a low number that turns into change orders once the tarps come off.

Installed Cost

## How Does ARP Price Commercial Storm Damage in Texas?

We do not compete on the lowest bid, and we will tell you that up front. What you get instead is a number built from an actual assessment: an ARP estimator walks the roof after the storm, tests the deck, checks the extent of the damage and the layer count, measures the real area, and writes the stabilization, repair, or replacement scope into a document you can hold before you commit a dollar. That is how a repair-or-replace call stops being a guess and becomes two priced options you can take to ownership.

That estimator work sits under real commercial-roofing authority. Randal Williams is a former commercial high-rise field engineer and Xactimate expert with 15+ years in roofing and construction. He has scoped and documented more than $7 million in insurance claim work across Texas, including single commercial claims above $2 million, supporting property managers and building owners through the claims process as the contractor of record.

On the roof, the work is led by an ARP project manager, and the installation partners we deploy and supervise under that project manager do the repair, with inspections at the milestones that matter. One project manager runs your storm job from the first tarp through warranty registration, so the number you signed and the roof you get are the same thing. ARP is a GAF GoldElite Commercial Contractor, registered with every municipality across our Texas service areas.

Storm & Insurance

## Your Next Step After a Commercial Storm

Storm damage does not wait for your budget cycle. Every front that passes over an open breach drives more water into the deck, soaks more insulation, and quietly moves a job that could have been a sectional patch toward a full tear-off. The move that protects you is getting the roof stabilized fast and the real scope documented before the damage compounds and before ownership hears about it from a leak instead of from you.

That is what an assessment gives you: a stabilized roof, a walked and tested deck, a repair-or-replace scope with the price attached, and a photo record your carrier can read. [Book your commercial storm assessment](https://arproofing.com/book/) and we will stop the water and put the scope and pricing on paper. If the damage looks widespread, [compare a repair against a full replacement](https://arproofing.com/commercial-roofing-contractor/roof-replacement/) before you decide.

Where to Go Next

## Related Guides

### [Commercial Storm Damage Response](https://arproofing.com/commercial-roofing-contractor/storm-damage/)

Stabilization through repair or replace

See Commercial Storm Damage Response →

### [Commercial Hail Damage](https://arproofing.com/commercial-roofing-contractor/storm-damage/hail-damage/)

The hail signature, and when it totals a roof

See Commercial Hail Damage →

### [Commercial Roof Repair](https://arproofing.com/commercial-roofing-contractor/roof-repair/)

The flat-priced sectional repair menu

See Commercial Roof Repair →

### [Commercial Roof Replacement](https://arproofing.com/commercial-roofing-contractor/roof-replacement/)

The per-square-foot method decision

See Commercial Roof Replacement →

### [Commercial Roofing in Texas](https://arproofing.com/commercial-roofing-contractor/)

Every system ARP scopes and installs

See Commercial Roofing in Texas →

- **Emergency stabilization:** flat job total, temporary tarping and dry-in with active leak control the day the storm clears.
- **Sectional storm repair:** line items inside a job that carries the $1,295 commercial minimum (metal panel patch, membrane patch, HVAC curb reflash, drain or scupper repair, full-section cut-and-replace).
- **Full replacement:** all-in installed per-square-foot methods (tear-off and recover), used when the storm totals the system.

**Pricing basis:**

- ARP's current pricing (Texas), September 2026: storm/emergency stabilization flat ($1,295 to $3,495), sectional repair flat bands, and replacement method bands ($14 to $20 tear-off, $9 to $15 recover) with building-size totals computed as actual roof square feet equals leased area times 1.25 footprint times 1.05 flat pitch. Regional variance across Texas runs roughly 3 to 10 percent. Final pricing depends on damage extent, deck condition, drainage, and access.

**Insurance & statute:**

- Texas Business and Commerce Code § 27.02: criminal offense for a contractor to advertise, pay, rebate, or waive an insurance deductible.
- Texas Insurance Code § 707.002: the insured must pay the deductible.

**Manufacturer Certifications:**

- GAF GoldElite Commercial Contractor
- Elevate Red Shield Licensed Contractor
- UNIFLEX Premier Elite Contractor

**Industry Membership:**

- BBB A+ Accredited
- CTRCA (Central Texas Roofing Contractors Association) Member

Questions that decide the job

## Frequently Asked Questions

### How much does it cost to stabilize my commercial roof right after a storm?

Emergency stabilization runs $1,295 to $3,495 as a flat job total, covering temporary tarping, dry-in, and active leak control. It is priced by the job, not by roof area, so your building size does not multiply it. Access, height, and how many breaches the storm opened set where you land in the range. See [commercial storm damage roofing →](https://arproofing.com/commercial-roofing-contractor/storm-damage/)

### Is commercial storm damage priced per square foot or per job?

Both, depending on the tier. Stabilization and sectional repairs are flat-priced by the job ($1,295 to $3,495 for most fixes, with a $1,295 commercial minimum). Only a full replacement is priced per square foot, at $9 to $20 installed all-in, because at that point the scope is the whole roof rather than a single repair. Do not multiply a repair number by your roof area.

### How much does it cost to fix bad hail damage on a commercial roof?

It depends on how far the hail reached. A sectional membrane or panel patch is a $400 to $2,000 line item and an HVAC curb reflash a $750 to $3,000 line item, inside a job that carries the $1,295 commercial minimum. Widespread hail bruising across an aged single-ply often totals the system, moving the job to a $14 to $20 per square foot replacement. See the [commercial hail damage page →](https://arproofing.com/commercial-roofing-contractor/storm-damage/hail-damage/)

### How much can structural or deck damage cost?

Deck and structural repair is quoted as a separate line item because it varies so widely. Minor deck patching folds into a sectional repair; a punched or rotted deck across a wide field is priced on the extent of the failure and can pull the whole roof into a tear-off. The written assessment finds this before contract, never on day three.

### Does insurance cover commercial storm damage?

Often, when the damage is storm-related rather than wear-and-tear. Sudden wind and hail in a datable event is a covered peril on most commercial property policies; ponding and age are maintenance items your policy treats differently. ARP documents the damage in writing and photos for your carrier submission, and that documentation belongs to you.

### How much does it cost to repair wind or tornado damage on a commercial roof?

Wind damage prices on extent. A lifted seam or a section of peeled metal panel repairs flat, from the $1,295 commercial minimum; a wider field that stripped panel and soaked the insulation underneath moves toward a $5,000-plus section replacement or a full per-square-foot replacement. The assessment measures how far the wind actually reached before we quote.

### Should I repair or replace my storm-damaged commercial roof?

Repair when the damage is sectional and the system underneath is sound; replace when the water spread widely, the insulation is saturated, or the roof was already near the end of its life. A Texas 25-percent code provision can also force a fuller scope. The only honest way to know is a deck assessment, not a phone quote. See the [commercial roof replacement page →](https://arproofing.com/commercial-roofing-contractor/roof-replacement/)

### Who is liable for storm damage to my building?

Storm damage to your building is generally handled through your own commercial property insurance, since it results from a covered weather event rather than another party's action. Your role is to document and file promptly; ARP's role as contractor of record is to photograph and scope the damage so your carrier sees the full picture. See our [commercial roofing contractor in Texas →](https://arproofing.com/commercial-roofing-contractor/)

## Start with the assessment, not the estimate

We look at the roof, document what we find with photographs, and give you the written assessment — whether or not you hire us. Then you decide, on your timeline.

[Free Inspection & Estimate](https://arproofing.com/book/)

[Call or text (210) 714-0040](tel:+12107140040)

![ARP Roofing emblem](https://arproofing.com/_astro/arp-roofing-logo-mark.DkCqIzKt_t6kXC.webp)